Alloy Steel Pipes Stockist & Seamless Pipe Exporter in India – ASME SA335 Grade P9
An established and recognized supplier in the piping and steel industry.
Manufacturer and supplier of Alloy Steel Pipes, ASME SA335 P9 Pipes, P9 Chrome Moly Alloy Steel Pipes, and P9 AS Seamless Pipes.
ASME SA335 P9 Alloy Steel Pipes
ASME SA335, also referred to as ASTM A335, is a specification covering ferritic alloy steel pipes intended for high-temperature and high-pressure service. Among the available grades under this specification is the ASME SA335 P9 Pipe. The grades defined in this standard are classified based on their chemical composition and mechanical properties, including tensile strength and yield strength. These pipes are typically supplied in seamless form and are manufactured using controlled processes to ensure compliance with the specification requirements.
Specifications of ASME SA335 P9 Pipe
The ASME SA335 P9 Pipes are heat treated through full or isothermal annealing processes. The material generally provides a tensile strength of approximately 60 ksi (415 MPa) and a yield strength of about 30 ksi (205 MPa). Pipes may be supplied in seamless, welded, or ERW form depending on project requirements. Standard supply lengths may vary from approximately 100 mm up to 12.5 meters, with pipe sizes and wall thickness selected according to the required application and specification limits.
Packing and shipping of the ASME SA335 P9 Pipe
ASME SA335 P9 pipes and tubes are packed carefully to ensure safe transportation and handling. Larger diameter pipes are typically protected with end caps and packed in wooden crates or suitable protective packaging materials to prevent damage during transit.
Alloy Steel ASME SA335 Grade P9 Pipes Supplier, ASME SA335 P9 Chrome Moly Seamless Pipe Stockist in India, ASME SA335 P9 Alloy Steel Seamless Pipes Stockholder, ASME SA335 P9 High Pressure Pipes, ASME SA335 P9 High-Temperature Service Pipes Exporter, P9 Alloy Steel Pipes
Standard Specification for ASME SA335 P9 Pipes
| Specification | ASME SA335 |
| Outer Diameter Size | 3/8" NB To 30" NB (Nominal Bore Size) |
| Wall Thickness | Schedule 20 To Schedule XXS (Heavier On Request) Up to 250 mm Thickness |
| Length | Standard length, Double length & In Cut length |
| Pipe Ends | Plain Ends / Beveled Ends / threaded Ends/ Coupling |
| Delivery Conditions | As Rolled, Normalizing Rolled, Thermomechanical Rolled / Formed, Normalizing Formed, Normalized and Tempered / Quenched and Tempered - BR / N / Q /T |
| Packaging | Loose / Bundle / Wooden Pallet / Wooden Box / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
