Supplier of stainless steel sheets for fabrication and corrosion-resistant applications
Supplying ASTM A240 stainless steel 316 sheets, SA240 SS 316 sheets, and 316 grade sheets
A240 Stainless Steel 316 Sheets
ASTM A240 Stainless Steel 316 sheets are supplied for fabrication and industrial applications where enhanced corrosion resistance, particularly in chloride environments, is required. ASTM A240 SS 316 Sheets are austenitic stainless steel products offering good strength, weldability, and formability, making them suitable for chemical processing, marine, and general engineering applications.
Product Description:
ASTM A240 Stainless Steel 316 sheets are manufactured in accordance with international standards and are available in a range of surface finishes such as mill finish, polished, sandblasted, and pickled conditions. These sheets can be supplied in both hot rolled and cold rolled forms, with typical thickness ranges and dimensions available as per project requirements. Additional forms include perforated sheets, shim sheets, and chequered plates.
Material quality is maintained through standard inspection and certification practices, including mill test certificates in accordance with EN 10204 3.1 and third-party inspection where required. ASTM A240 Stainless Steel 316 Sheets are tested through chemical analysis, mechanical testing, and dimensional verification to ensure compliance with applicable standards.
These sheets are supplied in bulk quantities with proper packaging using wooden pallets, crates, and protective wrapping to ensure safe handling and transportation for domestic and export shipments.
ASTM A240 SS 316 Sheets – Stainless Steel 316 Sheet & Shim Sheet Range
| Specification |
ASTM A240 / ASME SA240 |
| Item |
Stainless Steel Sheets |
| Standard |
JIS, AISI, ASTM, GB, DIN, EN, etc |
| Surface |
the surface and finish of stainless steel Sheets |
| Width |
1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length |
2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Finish |
Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Standard |
SS 316 |
| WERKSTOFF NR. |
1.4401 / 1.4436 |
| UNS |
S31600 |
| JIS |
SUS 316 |
| BS |
316S31 / 316S33 |
| GOST |
- |
| AFNOR |
Z7CND17‐11‐02 |
| EN |
X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
| Element |
SS 316 |
| C |
0.08 max |
| Mn |
2.0 max |
| Si |
1.0 max |
| P |
0.045 max |
| S |
0.030 max |
| Cr |
16.00 - 18.00 |
| Mo |
2.00 - 3.00 |
| Ni |
11.00 - 14.00 |
| Fe |
67.845 min |
| Element |
SS 316 |
| Density |
8.0 g/cm3 |
| Melting Point |
1400 °C (2550 °F) |
| Tensile Strength |
Psi – 75000 , MPa – 515 |
| Yield Strength (0.2%Offset) |
Psi – 30000 , MPa – 205 |
| Elongation |
35 % |
A240 Stainless Steel 316 Sheets Application
ASTM A240 Stainless Steel 316 sheets are used in fabrication, cladding, and industrial applications where enhanced corrosion resistance, particularly in chloride and marine environments, is required. Austenitic stainless steel 316 sheets manufactured to ASTM A240 specifications are suitable for moderate to elevated temperature service conditions and provide reliable performance in corrosive environments. These sheets are supplied through established stockholding networks and are specified for applications including:
- A240 Stainless Steel 316 Sheets uses in Power Plants
- A240 Stainless Steel 316 Sheets uses in Modern Architecture
- A240 Stainless Steel 316 Sheets uses in Petroleum Industry
- A240 Stainless Steel 316 Sheets uses in General Purpose Applications
- A240 Stainless Steel 316 Sheets uses in Fabrication Industry
- A240 Stainless Steel 316 Sheets uses in Oil & Gas Industry
- A240 Stainless Steel 316 Sheets uses in Fertilizers
- A240 Stainless Steel 316 Sheets uses in Electronics
- A240 Stainless Steel 316 Sheets uses in Construction
- A240 Stainless Steel 316 Sheets uses in Chemical Industries
- A240 Stainless Steel 316 Sheets uses in Plumbing
A240 Austenitic Stainless Steel 316 Sheet Price List
Export Destinations For A240 Stainless Steel TP316 Sheets
Israel, Afghanistan, Libya, Serbia, Peru, Lebanon, Belarus, Sri Lanka, Hungary, Saudi Arabia, Bhutan, Chile, Kenya, United States, Kuwait, South Korea, Angola, Nigeria, Trinidad & Tobago, Austria, Costa Rica, Kazakhstan, Algeria, Morocco, Russia, Switzerland, Venezuela, Puerto Rico, Egypt, Philippines, Bangladesh, Slovakia, Gabon, Indonesia, Italy, New Zealand, Poland, Chile, Colombia, Ecuador, Turkey, Qatar, France, Namibia, Tibet, South Africa, Bahrain, Malaysia, Gambia, Portugal, Australia, Hong Kong, Yemen, Ireland, Greece, Nigeria, Thailand, Zimbabwe, Jordan, Mongolia, Macau, Finland, Singapore, Argentina, Germany, Tunisia, Oman, Iran, United Kingdom, Sweden, Spain, Netherlands, Norway, India, Mexico, Estonia, Azerbaijan, Nepal, Croatia, United Arab Emirates, Bulgaria, Japan, Belgium, Canada, Ghana, Denmark, China, Brazil, Bolivia, Lithuania, Taiwan, Ukraine, Iraq, Vietnam, Czech Republic, Romania
