Trusted & Recognized name in the Instrumentation Industry!
Distributor of Gyrolok® Tube Fittings, Connects Two or More Tubes Together, Connects Tubing to Male Thread, Connects Tubing to 37° Flare, Connects Tubing to Welded System Etc.
Gyrolok® Tube Fittings
We, Savoy Piping Inc., are Agent, Distributor, and Supplier of the different industrial piping applications. We Distribute Gyrolok Tube Fittings in various shapes, sizes, types, specifications, and designations. Gyrolok® Tube Fittings are applicable in Instrumentation piping applications. Gyrolok Tube Fittings have been carefully designed and manufactured to provide outstanding leak-tight integrity in a wide range of applications. The fittings provide safe, reliable performance from cryogenic temperatures to high temperature bake out levels, depending on material.
A key feature with Gyrolok Tube Fittings is that you can remake the Fitting, with Traditional Compression Fittings when you inset the tube into the fitting it bottoms out, forming a right angle [between the tube and the fitting] which leaves no additional space for movement as you tighten the fitting down. Since you are pushing the tube forward as you tighten it, this tends to lead to the tube galling or sticking (commonly known as a “tube sticking”). This can results in longer down times due to the need to cut out the valve or fitting that the tube is stuck in and replacing with a new valve or fittings.
SS Gyrolok® Fittings Supplier in Mumbai India, Incoloy Male Adaptor, Compression Male Connector, Alloy 20 Female Adaptor, Titanium Bulkhead Male Connector Exporter, SMO 254 Compression Male and Female Elbow, Steel Compression Female Run Tee Connector, Standard Size Gyrolok Compression Fittings Distributor.
Gyrolok® Tube Fittings have a slight taper (sizing angle) at the base of the fitting allowing the tube to stop before bottoming out, yet still allows the tube room to move forward as the nut is tightened, thereby reducing the tendency for it to stick or gall. This key feature of Gyrolok Tube fittings allows you to repeatedly undo and redo the connection to perform any needed maintenance, resulting in less down time and the need for new materials.
Standard Specification For Gyrolok Tube Fittings
|Brand Name||Gyrolok® Tube Fittings, Hoke Tube Fittings, Circor Tube Fittings, Crane Tube Fittings.|
|Tube Fittings Size||1/16”OD to 2”OD, 2mm OD to 50mm OD|
|Material Grades||Brass: BR, 304 Stainless Steel: 304/304L, 316 Stainless Steel: 316/316L, MONEL®: M, HASTELLOY® C-276: HC, Duplex 2205: DX3, INCONEL® Alloy: 625, INCONEL® Alloy: 825, Super Duplex 2507: D50, Titanium: TI, 254 SMO: 6MO
316/316L SS Forgings: ASTM A-182/SA182, 304/304L SS Forgings: ASTM A-182/SA182, Brass Bar Stock,Alloy 360: ASTM B-16, 316/316L SS Bar Stock: ASTM A-479/SA479, 304/304L SS Bar Stock: ASTM A-479/SA479, MONEL® Forgings, Alloy 400: QQ-N-281, Brass Forgings, Alloy 377: QQ-B-626/ASTM B-283, MONEL® Bar Stock, Alloy 405: QQ-N-281, Brass Bar Stock, Alloy 353: ASTM B-453
|Types||Connects Tubing to Female Threads: Straight connectors, Elbow connectors, Tee connectors
Connects Two or More Tubes Together: Union, Reducing Union, Bulkhead Union, Union Elbow, Union Tee, Reducing Run Tee, Reducing Branch Tee, Reducing Union Tee, Union Cross, Heat Exchanger Tee
Connects Tubing to Male Thread: Female Elbow, Female Connector, Bulhead Female Connector, Bulhead Run Tee, Female Branch Tee
Connects Tubing to 37° Flare: Union, Bulkhead Union, Adapter
Connects Tubing to Welded System: Tube Socket weld Connector, Tube Socket weld Elbow, Butt weld Connector, Butt weld Elbow
Caps and Plugs: Cap, Tube Cap, Plug
Adapters: Male Adapter, Male SAE Adapter, Female Adapter, Bulkhead Adapter
Spare Parts: Front Ferrule, Rear Ferrule, Back Ferrule, Nut, Bulkhead Nut, Knurled Nut
Connects Tube Fittings Together: Port Connector, Reducing Port Connector
Tools and Accesories: Marking Tool, Pre Setting Tool, Die Set, Leak Detective Product.
RS Bonded Seals, Chromatography Fittings
|Other Hoke Products||Instrumentation Valves: Instrumentation Valves Ball Valve, Needle Valve, Flow and Fluid Control Components, Packless Valves
Metering Valves, Plug Valves, Manifolds, Guage Valves, Hand Valves, Doubles Block & Bleed Valves, HOKE Block Valves, HOKE Monoweld Valves
Actuators: Space Saver Actuators, Electric Actuators, Pneumatic Actuators
Sampling Cylinders: Spun Sampling Cylinders, Formed Sampling Cylinders, Sampling Cylinder
Flow & Fluid Control Components, Pipe Fittings, Instrumentation Manifolds, HQC Series Quick Couplings, CT76
|Threads||NPT (National Pipe Taper), BSP/ISO (British Standard Pipe/International StandardsOrganization), SAE or unified screw threads, Tapered Threads, Straight and Parallel Threads|
|Pressure Rating||GYROLOK® fitting ends are rated forworking pressures higher than the tubing recommended for use with GYROLOK®. Under no circumstances should tubing be utilized at pressures above its maximum allowable working pressure. Refer to the HOKE® Tubing Data Charts for specific information. If no pressure is identifi ed for a given tube size and tube wallthickness, that tubing is not considered suitable for use with GYROLOK® tube fi ttings. Pressure ratings may vary for the other fi tting end if it is not GYROLOK® (i.e. NPT or O-Ring Seal). For general working pressure ratings for NPT fittings ends, refer to the HOKE® Pipe Fittings catalog. The user must determine whether both the GYROLOK® side and the non-GYROLOK® side working pressure ratings are suitable with the system pressure.|
|Temperature||GYROLOK® fi ttings provide safe, reliable performance from cryogenic temperatures to high temperature bake out levels, depending on material.
316 Stainless Steel: -325° F to +800° F (-200° C to +426° C)*
Stainless steel front ferrules larger than 1” and 25mm are PFA coated. Applications above 450° F (232° C) require silver-plated front ferrules and uncoated rear ferrules. To order extended temperature fittings, add –HT to the basic part number.
Brass (copper tubing): -325° F to +400° F (-200° C to +203° C)
MONEL®: -325° F to +800° F (-200° C to +426° C)
|Coating||PFA Coating - Stainless steel front ferrules larger than 1” and 25 mm are PFA coated.|
|Vacuum Rating||GYROLOK® offers deep vacuum capability. With good quality tubing, GYROLOK® fi ttings will be leak-tight at vacuum levels of 10-6 torr while tested with a leakage sensitivity of 10-9 scc|
|Gyrolok® Tube Fittings Datasheet||Visit at Hoke Catalog|
|CONTROLLED FERRULE DRIVE||Provides maximum user safety under high pressure/vibration conditions. Prevents overstressing, which causes tubing failure and possible injury. System efficiency is improved by maximizing flow.Provides unmatched remake life. Maximizes value and economy.|
|BUTT SEAL||Maximizes fitting leak integrity and user safety. Can seal with scratched tubing. Increases accuracy in sampling applications.Reduces pump-down time in vacuum applications.|
|HOKE® VALVES WITH INTEGRAL GYROLOK® END FITTINGS||Long product life and maximum value. Safety and economy|
|GYROLOK® SAFETY CHANGER NUT AND FERRULE SETS||Safest, simplest device for component replacement.|
|GMT||Maximum safety resulting from ability to verify correct tube insertion and proper tightening.|
|SIZING ANGLE||Less tube sticking during disassembly saves time and money|
|SILVER- PLATED NUT THREADS||Extended product life at extreme temperatures|
|MATERIAL TRACEABILITY ON FITTING BODY AND NUT||Traceability provides added safety. Certified Material Test Reports are available for review and verification.|
|PFA FERRULE COATING||Increased resistance to media and atmospheric corrosion.|
|SPECIAL HIGH TOLERANCE NPT THREAD||Provides a Safer more robust connection: 63% tighter tolerance with up to six thread engagement, reduced galling and vibration|